Wish me luck...

Discussion in 'LOCAL SOUTH CAROLINA TALK' started by Bill in SC, Oct 26, 2008.

  1. Bill in SC

    Bill in SC New Member

    Messages:
    4,451
    State:
    South Caro
    http://www.catfish1.com/forums/showthread.php?p=1241425#post1241425

    This happened at a most inopportune time, with our tourney approaching this weekend. I'll be there either way, but I surely hope to have my own boat. BTW: James, I have recruited two new members for our club who will be there Saturday. We may camp out next Friday night at the landing. I did catch about a dozen and a half bream before my mishap today, but most are about saltine cracker size. I may try for bait again tomorrow, if I can get my dilemma worked out.
    BB in SC
     
  2. takeaction

    takeaction New Member

    Messages:
    427
    State:
    Ware Shoals, SC
    Good luck Bill on both the engine and the tourney! :wink:
     

  3. Bill in SC

    Bill in SC New Member

    Messages:
    4,451
    State:
    South Caro
    Thanks Wayne! I'll need luck with BOTH! :sad2:

    Bill in SC
     
  4. catman4926

    catman4926 New Member

    Messages:
    1,602
    State:
    Texas
    Bill ,
    You might put some light weight oil in it and flush it ,drain it then wash it out with desail are varsal then refill it with the reg. lube . anyway good luck
     
  5. Bill in SC

    Bill in SC New Member

    Messages:
    4,451
    State:
    South Caro
    GREAT advice, Harold!!
    Bill in SC
     
  6. BigBird

    BigBird New Member

    Messages:
    2,104
    State:
    Charlotte, NC
    Bill I would let you use mine but the CCC has a tourney on wylie the same day.
    I know you can find a ride down there but you are always welcome up here also.
    Good luck!
     
  7. drpepper

    drpepper New Member

    Messages:
    6,133
    State:
    Indiana
    Bill, I think even if you had to paddle you'd still get out there! lol

    Good luck!
     
  8. rivercatsc

    rivercatsc New Member

    Messages:
    1,990
    State:
    South Caro
    Bill Im with Harold I believe I would flush it with kerosene or deisel and then run it with some standard 90w run for a few hours and then change oil again. Deffitantlly change the seal those rocks up there are seal and prop killers. Good luck Bill.
     
  9. pop pop

    pop pop New Member

    Messages:
    972
    State:
    Lake Green
    Bill, Hope everything works out for ya.