What would have been...

Discussion in 'LOCAL INDIANA TALK' started by whiteriverbigcats, Apr 29, 2009.

  1. whiteriverbigcats

    whiteriverbigcats New Member

    Messages:
    3,452
    State:
    Indiana
    Here are a few pics of what would have been for the Rocky Point Gathering plaque.. Its pretty awsome its not finished yet but I decided to Keep this one because it was a rough draft but now that I know what it will turn out like I will be sure to get more made.. Had to modify it in order for it to come out and work right.. Then it was having the guy cut it..
     

    Attached Files:

  2. kyleco55

    kyleco55 Well-Known Member

    Messages:
    1,359
    State:
    Central In
    that looks sweet
     

  3. whiteriverbigcats

    whiteriverbigcats New Member

    Messages:
    3,452
    State:
    Indiana
    Im going to keep this one for myself, but I would like to make one for a future Gathering...
     
  4. kyleco55

    kyleco55 Well-Known Member

    Messages:
    1,359
    State:
    Central In
    like monroe in the fall??:smile2:
     
  5. biga

    biga Well-Known Member

    Messages:
    2,112
    State:
    evansville
    i will buy it!!!:cool2: that is cool as hell.....
     
  6. tackleholic

    tackleholic New Member

    Messages:
    1,000
    State:
    New Albany
    Nice job Shane.:wink:
     
  7. bnorth

    bnorth New Member

    Messages:
    539
    State:
    Indiana
    That is very cool. That'd look good in my man cave.
     
  8. Blacky

    Blacky New Member

    Messages:
    10,351
    State:
    Philadelphia, P
    I didn't know you were artistic?
     
  9. SkipEye

    SkipEye Well-Known Member

    Messages:
    7,525
    State:
    Winfield, MO
    Name:
    Darryl
    Dude!!!! I'll buy one now! Is that CNC cut? Laser cut? Water Jet?

    What are the rough dimensions????
     
  10. Fishgeek

    Fishgeek Active Member

    Messages:
    1,149
    State:
    Indiana
    Nice job Shane! That's one cool cat!!
     
  11. whiteriverbigcats

    whiteriverbigcats New Member

    Messages:
    3,452
    State:
    Indiana
    Its water jet.. 13" 1/2" Wide x 22" Tall. Its 1/8th inch stainless steel... I need to get a back drop for it. But I dont know what i like the best.. It has some weight to it and looks good if I put it on the wall as is... But I think it would look better in a back drop of some kind... I will look into cost and get a Price set up and I just may have some made in baulk... LOL:wink:
     
  12. SkipEye

    SkipEye Well-Known Member

    Messages:
    7,525
    State:
    Winfield, MO
    Name:
    Darryl
    Since it's programmed already can you shrink it?

    I got a spot on my boat where it would go nicely if it was smaller!
     
  13. drpepper

    drpepper New Member

    Messages:
    6,133
    State:
    Indiana
    definately cool bro... yeah that IS very marketable I'd think.
    Offer different sizes--- that size, down to keychain size, in say; Stainless, silver plated, gold plated, etc.... If you advertise on the BOC and say... everybody buys ONE, even if you made just a dollar profit on each one... THERE is a nice jet boat:wink:

    PS when you get rich, just don't forget poor ol drpepper.... AKA flattie stalker. lol
     
  14. RiverBuggy4x4

    RiverBuggy4x4 New Member

    Messages:
    589
    State:
    Indiana
    Dude hows come you never showed me that that is one freaking awesome catfish we need swmaller ones for our boat:smile2::smile2::smile2::smile2:
     
  15. catfishcatcher

    catfishcatcher New Member

    Messages:
    493
    State:
    indiana
    Man that is sweet!!!!!!! That would look awesome on my tailgate of my new 4x4. Heck one for my boat would be great also. You should try to market them, at least here on the BOC.
     
  16. Wabash River Bear

    Wabash River Bear New Member

    Messages:
    3,019
    State:
    Indiana
    Shane, you have outdone yourself bro. That is sweet. You really should consider what some of the others are saying, might be a nice lil business project for yourself. I can see having one of those shrunk down a bit and cut out of thinner stainless with 3m trim adhesive on the back for the tailgate of my pickup or on my boat. Good job bro, keep up the good work and good luck. WRB
     
  17. river scum

    river scum New Member

    Messages:
    3,474
    State:
    hooterville indiana
    i agree with everyone else, sell some! i could see one here above my computer with pics all around it. lol very very nice Shane!
     
  18. biga

    biga Well-Known Member

    Messages:
    2,112
    State:
    evansville
    shane you copy cat!!! bass pro sells the decals that you copied the art work from!! :smile2::smile2: your busted!!:wink:
     
  19. drpepper

    drpepper New Member

    Messages:
    6,133
    State:
    Indiana
    :crazy: you plagerized a catfish? lol
     
  20. SkipEye

    SkipEye Well-Known Member

    Messages:
    7,525
    State:
    Winfield, MO
    Name:
    Darryl
    Bass Pro doesn't do them in stainless steel either so who cares, not me. Way COOL and I really want a smaller version, no kidding.