Tilt switch

Discussion in 'Boat Repair Help' started by jeffw51, May 2, 2008.

  1. jeffw51

    jeffw51 New Member

    Messages:
    288
    State:
    mo
    i installed new tilt motor,now i need to know how to wire it to the switch and to the battery?it has a green wire a blue wire and a black wire.
     
  2. jeffw51

    jeffw51 New Member

    Messages:
    288
    State:
    mo
    do green and blue wire connect to positive post?
     

  3. AwShucks

    AwShucks New Member

    Messages:
    4,532
    State:
    Guthrie, Oklaho
    Jeff, the green and blue connect to the up/down positions on the switch, the black is ground, and you run a red to the switch for the positive. Don't wire them to the positive as your apt to burn out the tilt motor.
     
  4. jeffw51

    jeffw51 New Member

    Messages:
    288
    State:
    mo
    thanks lawrence,i now have it all hooked up thanks to your help.