Tilt and trim

Discussion in 'Bubba's Outboards' started by shane12970, Jul 31, 2007.

  1. shane12970

    shane12970 New Member

    Messages:
    131
    State:
    , North Carolin
    o my tilt and trim. i push the down button and all is well. i push up button and it clicks. ..so i go back to tilt pump and it has 2 selonoids(im guesing) i short out the two screws and the up will work. will shorting these out hurt the motor? and what is the part called ?
     
  2. Bubbakat

    Bubbakat New Member

    Messages:
    4,532
    State:
    McMinnvill
    What year and what type of trim system is it. It doesn't hurt them to do that. Just switch the wires to the other one and if it works that way you have a bad selnoid or a dirty connection at the switch.
     

  3. shane12970

    shane12970 New Member

    Messages:
    131
    State:
    , North Carolin
    its a 1991 cajun fish and ski w a 80 hp mariner.. on the motor where can i find the info.. ive took the covers off and havnt seen a plate ...