Catfish Angler Forum at USCA banner

Starter

812 views 8 replies 4 participants last post by  metalman 
#1 ·
I have 1972 Chrysler 55 hp motor. I am trying to replace the starter. I believe I have all the bolts on the bracket off but it still won't come loose. Did I miss a bolt? Been working on this for 2 days now and getting very frustrated. Thanks for any help you all might be able to help me with.
Santa G
 
#4 ·
Welcome to the forum Santa!
Wish I could help on your motor starter issue, I would suggest looking on YouTube for ideas.
Regarding bait, I would recommend posting that question in the catfish bait section. But as long as you focus on using whatever their normal forage is in your area, that is a good place to start. Best of luck!
 
#5 ·
Hi
I have removed bolts from lots of things that did not want to come loose and wondered if there was still a bolt that I did not see.
sometimes there is and sometimes there is not.
just be patient and like Eric said try to find a manual or diagram.
if you gotta start beating on it just go light like press a 2x4 up against it then lightly tap the wood with a hammer
let us know
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top