small carbs fuel path

Discussion in 'Other Repairs' started by shuorc, Jun 5, 2008.

  1. shuorc

    shuorc New Member

    Messages:
    116
    State:
    fl
    where would a person find a diagram showing the fuel path for a weedeater carb? After cleaning still don't work am missing something.--shu
     
  2. tspergin

    tspergin New Member

    Messages:
    867
    State:
    newark ohio
    did you check the float level or check to see if the exaust port is plugged up with carbon
     

  3. 1sporticus

    1sporticus Active Member

    Messages:
    1,006
    State:
    Iowa
    usually once the diaphram gets stretched or brittle they won't work. You can get a kit for these, but you'll need to take the carb with you when you order it. Later andy
     
  4. shuorc

    shuorc New Member

    Messages:
    116
    State:
    fl
    thanks for the replies, had small black junk in the tank and found the LITTLE holes in the venturie(?) plugged blew all holes with air pressure and used a small piece of wire to unclog the holes, now working but would still like to find the fuel path thru the small carbs like chain saws, weedeaters and Mantis tillers.--shu
     
  5. shuorc

    shuorc New Member

    Messages:
    116
    State:
    fl
    Went to the library and found 'Clymer's Chain Saw Service Manual', has all the small carbs broken down and info for each.
    Why does it always take so long to find things you REALLY wanted last week???--shu