Shinchan's Rod Carrier

Discussion in 'Catfishing Library' started by Whistler, Sep 7, 2005.

  1. Whistler

    Whistler Well-Known Member

    Original post made by Randy Meyer(Shinchan) on May 14, 2005

    Heres a rod carrier that I made from a few scraps of plywood.

    I used 1/2" ply with 3/4" and 1 1/2" holes, lined the inside with felt and used an old broom stick for the handle. Two lengths of bunji cord keep the poles on. It'll hold 6-8 rigged spinning combos without tangling and you can set it on the ground without getting the reels dirty. I used it to set up all my poles before fishing so I can get started right away and it makes for a quick clean up too.[​IMG]