Catfish Angler Forum at USCA banner
1 - 1 of 1 Posts

· Registered
2,899 Posts
Discussion Starter · #1 ·
Orignal post made by Rod Neil(Shovelcat44) on December 24, 2002

Here is the tank that I built out of a 125qt. cooler.I used 1/2" pvc pipe. The top piece has 1/4" holes drilled about 1" apart. It is hooked to a 500gpm pump. I have ran a wire from my truck to run the pump while I am driving to the lake or river. The coolers were $35 at Sam's Club, the pump was about $15, and I have about $10 in the pvc and clamps to hold the pvc in place.

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.