Puting on B.O.C. Decals

Discussion in 'Other Repairs' started by BIGCAT GarryEads, Jan 17, 2006.

  1. BIGCAT GarryEads

    BIGCAT GarryEads Head Cheese of the USCA!

    Messages:
    334
    State:
    Francisco Ind
    OK,here go's I got some B.O.C. decals to put on my truck and boat.
    What is the correct way to do it?:)
    BIGCAT GarryEads
     
  2. teaysvalleyguy

    teaysvalleyguy New Member

    Messages:
    9,751
    State:
    GC, OHIO
    Clean your window real well Gary with some Alcohol based cleaner. Then, make sure you line up where you want to put it before you remove the back. Carefully remove the back and push the middle part of the decal wherever you want it. Then take a putty knife/credit card/ice scraper some sort of flat object and smooth out one side at a time. Make sure to remove all bubbles and swipe it across the whole decal many times. Then just slowly remove the top of the decal and it should stick with no problem. If the letter start to lift just put some pressure on top of the paper again with the flat object and that will help them stick. Next time I put one on I will try and do a step by step.

    Window should be warm though when you put on the decal, will help a ton with the adhesive. Good luck Gary.
     

  3. redneckdrum

    redneckdrum New Member

    Messages:
    623
    State:
    kansas
    where and how can i git som decals? I want some
     
  4. BIGCAT GarryEads

    BIGCAT GarryEads Head Cheese of the USCA!

    Messages:
    334
    State:
    Francisco Ind
    John go to the Member special topic forums . Then go to the B.O.C. store.:)

    BIGCAT GarryEads
     
  5. Desperado

    Desperado Active Member

    Messages:
    1,244
    State:
    Pataskala, Ohio
    Name:
    Clarence
    The way I put them on is. Take a spray bottle with a drop on soap for the whole bottle and spray it on the window. Place the decal on the window and with the window wet you can put the decal in place and center it up and use a plastic putty knife/credit card and work out ward from the center and get all the water out and the bubbles will come out very easy. leave it set til it dries in about 15-20 mins. and there you go. I have used windex and worked fine also. Just use a light mist, this is after you clean the window.
     
  6. BIGCAT GarryEads

    BIGCAT GarryEads Head Cheese of the USCA!

    Messages:
    334
    State:
    Francisco Ind
    Clarence ,thank's for your help.:)

    BIGCAT GarryEads
     
  7. Whistler

    Whistler Well-Known Member

    Messages:
    3,084
    State:
    TN
    Gary, if you're coming to the fish and camp bring it with you and we'll get er on there.
     
  8. BIGCAT GarryEads

    BIGCAT GarryEads Head Cheese of the USCA!

    Messages:
    334
    State:
    Francisco Ind
    I will be at fish and camp the 11th-12th Bryan , thank,s
    Jim , thank,s for your help.:)

    BIGCAT GarryEads