Penn 109 help

Discussion in 'Reel Repair and Upgrades' started by DM1975, Apr 25, 2007.

  1. DM1975

    DM1975 New Member

    Messages:
    217
    State:
    Manhattan, Kansas
    I have an older Penn 109 that I am missing a screw in and I need the part number for said screw. It is one of the outside screws that goes through to the part that fits to the rod. If anyone knows please let me know. Thanks.
     

  2. DM1975

    DM1975 New Member

    Messages:
    217
    State:
    Manhattan, Kansas
    Thanks for the help but oddly enough the links to the 109 are all broken. Does anyone know if it is the same screw as on the 209? Thanks.
     
  3. Flintman

    Flintman New Member

    Messages:
    710
    State:
    OKC, OKLA.
    I rebuilt a 109 and got all my replacement parts at Academy. That has been 5 or 6 years ago. Then I bought an old 109 at the flea market for extra parts.
    If Academy dont have the part they can order it for you.
     
  4. DM1975

    DM1975 New Member

    Messages:
    217
    State:
    Manhattan, Kansas
    Sadly there is no Academy anywhere near me. I will check with them next month when I go back to Texas tho. Was going to just buy a screw for it off ebay but they are all listed by part number, which I do not have.
     
  5. canebreaker

    canebreaker Well-Known Member

    Messages:
    1,307
    State:
    Southaven,MS
    the screw that goes thru the side plate into the stand is a 32-2. Is that the screw you need?
    Smallest one I have is a 32-14
     
  6. canebreaker

    canebreaker Well-Known Member

    Messages:
    1,307
    State:
    Southaven,MS
  7. DM1975

    DM1975 New Member

    Messages:
    217
    State:
    Manhattan, Kansas
    That is it. I dont know why the page would not open for me earlier.