No Roll Add On's

Discussion in 'Sinker Making Institute' started by Stubby, Jun 27, 2009.

  1. Stubby

    Stubby New Member

    Messages:
    208
    State:
    Kansas, Ar
    If you want more weight just add more No-Rolls to the wire or string. You can use any combination of no rolls and they lay flat on the bottom. The wire is soft wire available at any building supply center or use a wire coat hanger. Two 5 oz no rolls is a 10 oz weight etc. Hang it on a sinker slide or attach a swivel on the wire.






    P1000235.jpg

    P1000234.jpg

    P1000232.jpg
     
  2. BIG_D

    BIG_D New Member

    Messages:
    8,107
    State:
    Batchtown IL.
    pretty smart idear for a old fart lol just teasing ya stubby thanks for posting this i will make up a few my self just prooves more than one way to skin a cat :wink:
     

  3. shanelures

    shanelures New Member

    Messages:
    517
    State:
    ohio
    great idea!! shane
     
  4. Jacksmooth

    Jacksmooth Member

    Messages:
    574
    State:
    West Virginia
    Pretty neat idea! Thanks!
     
  5. Swampfox.

    Swampfox. New Member

    Messages:
    1,182
    State:
    Louisiana
    thats a good idea Carl, thanks for the imput
     
  6. Catfishboy1995

    Catfishboy1995 New Member

    Messages:
    3,104
    State:
    Council Bluffs
    So are you running the wire through the hole and coiling it or are you pouring them like that??Im counfused?:confused2::confused2:
     
  7. JEFFRODAMIS

    JEFFRODAMIS New Member

    Messages:
    2,537
    State:
    TEXAS
    thanks brotha
     
  8. Bobpaul

    Bobpaul New Member

    Messages:
    3,039
    State:
    Supply NC
    You could just leave a long wire sticking out for use on a three way for the bottom bouncing drift.

    If the sinker gets hung up, a good pull will retieve the wire, and hang on another sinker.

    I use the wire from inside a Johnson Evinrude control cable. They're stainless steel.
     
  9. BIG_D

    BIG_D New Member

    Messages:
    8,107
    State:
    Batchtown IL.
    Rich He just runs the wire thrue the sinkers as needed and bend the wire on the end to keep them on they are not poured that way works very well
     
  10. Mickey

    Mickey New Member Supporting Member

    Messages:
    14,592
    State:
    Illinois
    Neat idea. Thanks.
     
  11. Fatman

    Fatman New Member

    Messages:
    45
    State:
    Vermont
    Heck of an Idea!!!!!!!! THank you

    Fatman
     
  12. Jeremy Sheffey

    Jeremy Sheffey New Member

    Messages:
    2,388
    State:
    Columbus, Ohio
    great thread and post, ill be using that sooner rather than later...
     
  13. Jedicazador

    Jedicazador New Member

    Messages:
    213
    State:
    TN
    just started pouring, this is a great Idea! Thanks for sharing
     
  14. katman#1

    katman#1 New Member

    Messages:
    1,209
    State:
    South Carolina
    thanks for sharing great idea
     
  15. Catfishboy1995

    Catfishboy1995 New Member

    Messages:
    3,104
    State:
    Council Bluffs
    Thanks Big D,thats what i figured but i have seen like that drywall mold that uses wire and you could just pour them that way...and folr the wire and so be it..
     
  16. linedrager

    linedrager New Member

    Messages:
    173
    State:
    ky
    I love this web site, no mater how smart you are, if you take the time to look around it's amazing what you can learn, and their are so many genius ideas, thanks to all for all the great info, my catfishing and striper fishing has improved greatly in a short time, thanks to all.
     
  17. Matt77

    Matt77 New Member

    Messages:
    247
    State:
    from Us NY live in Cnt FL
    Don't need giant weights like that here in FL but the sinker slide is pretty cool and I just started using them not too long ago. They save my braid from being torn up by an egg sinker.
     
  18. plainsman

    plainsman New Member Supporting Member

    Messages:
    7,187
    State:
    minnesota
    Great idea, I do that with egg sinkers too.