Need your help

Discussion in '4X4 Truck Talk and Repairs' started by truckin4x4, Jul 14, 2007.

  1. truckin4x4

    truckin4x4 New Member

    Messages:
    759
    State:
    columbus, Ohio
    I have a 99 dodge 2500 v-10 and my stering is loose. i was in an accident a year ago and i was wonder if anyone new how to tighten it up at the gear box. i did look at it and all the movement is between the box and the stering wheel. can you help.
    rob
     
  2. fordman49450

    fordman49450 New Member

    Messages:
    30
    State:
    Michigan
    well if it's like a standard gearbox, it will have a sector shaft adustment. you will see a nut on top and what looks like a slot cut in the top of the shaft, loosen up the nut, and then tighten the shaft with a flat headed screwdriver untill the play it out, then tighted up the jam nut.