need some engine swap help

Discussion in '4X4 Truck Talk and Repairs' started by FirefighterBull, Sep 25, 2009.

  1. FirefighterBull

    FirefighterBull New Member

    Messages:
    44
    State:
    Charlotte Tennessee
    i have a 93 f250hd 4x4 the motor is blown it has a 351w in it an i am rying to keep cost down as much as possible on replacing it i dont do any heavy hauling wit it just boat is all small trailors. I found a good 302 for my price range and i know it will bolt up to transmission fine and told motor mounts will be the same only difference i was told was just like an inch shorter Height wise. just curious if anyone can think of any issues with it main wire plug is the same everything looks good. let me know if any yall have any thoughts on it thanks
     
  2. JEFFRODAMIS

    JEFFRODAMIS New Member

    Messages:
    2,537
    State:
    TEXAS
    it should work just fine brotha
     

  3. catman-j

    catman-j New Member

    Messages:
    1,020
    State:
    Eastern Nebr
    IT should be ok but maybe the computer/ecm is set up for a 351 not a 302.
     
  4. kscathunter

    kscathunter New Member

    Messages:
    2,367
    State:
    Louisburg,
    the ecm will probally have all the controlls programmed for the 351w witch will have different a/f levels probally different fireing order ect probally need reprogrammed :confused2: