Need info replacing the water pump

Discussion in 'Bubba's Outboards' started by Cattracker16, Aug 14, 2006.

  1. Cattracker16

    Cattracker16 New Member

    Messages:
    356
    State:
    Wilton Iowa
    I have a 50 hp merc built in 05' what i am in need of is some info how to take off and replace the water pump. I did it on a 77 evenrude 40 hp. now that was a pain in the rear. just hope this would be easier. all info would be nice maybe some diagrams even. it could make the library.
    Thanks in advance

    Kenny
     
  2. Bubbakat

    Bubbakat New Member

    Messages:
    4,532
    State:
    McMinnvill
    Kenny I have never changed one on 05 model but it can't be much different from the others. The main thing is to find out where the shifter disconnects. Either buy you a manuel or go to your local library and look at theirs. They will let you make a copy of what ever you need to.
    I'll look in the mean time and see if I can find a view of the lower unit.
     

  3. Bubbakat

    Bubbakat New Member

    Messages:
    4,532
    State:
    McMinnvill
    Kenny I found the info you need but I need the serial number to get the right one for you.
     
  4. Bubbakat

    Bubbakat New Member

    Messages:
    4,532
    State:
    McMinnvill
    Is this a 2 or 3 cylinder?
     
  5. Cattracker16

    Cattracker16 New Member

    Messages:
    356
    State:
    Wilton Iowa
    it is a 3 cylinder here is info from the tag on boat motor
    serial # 1B142703 model # 50ELPTO thanks Willard your a gentleman and a great brother to have around

    Kenny
     
  6. Cattracker16

    Cattracker16 New Member

    Messages:
    356
    State:
    Wilton Iowa
    Thank you willard for the link I do believe that it will come in handy