My River Rod Holders

Discussion in 'Catfishing Library' started by heavyduty, Dec 24, 2006.

  1. heavyduty

    heavyduty New Member

    Messages:
    450
    State:
    Grand Gulf,MS
    I built this rod holder out of galvanized steel pipe.
    The top bar is 3/4''ID and the OD is 1'' which fits the driftmaster 1'' round bases. I can adjust them to any angle I need.

    The two vertical pipes are 1/2'' (just because i already had them)
    I used 3/8 allthread and ran through them, the boat,and the top pipe
    I used the brackets off an old basketball goal and spray painted them silver


    [​IMG]

    [​IMG]

    [​IMG]