Catfish Angler Forum at USCA banner

Mercury controller

1K views 13 replies 6 participants last post by  ramon06 
#1 ·
Anyone know what needs to be done to get this kind of controller apart?

Get lever off with trim switch. The three philips screws just turn and turn and nevr come loose.

Need to get to wires on the tether kill switch to install mob switch.

TY
Bill
 
See less See more
1
#9 ·
Well, even Fell marine knows not how to get cover off. Guess I blew 240.00 for nothing.

Dealer refuses to install. This is cause thiers was on backorder for a very long time. So orderd one on line. Dealer did tell me that black/yellow tracer were the wires for it. Tether kill switch that is.
 
#10 ·
Well looking better. Found wires on motor to conect to for mob. Put it on muffs and yes, they are the kill wires.

So now got main button mounted and wires fished. Still need to hook wires onto motor wires and conect power wires. Had to hole saw a 2 inch hole near controller for button. Then reasemble side oanels, interior leds, and remount rod rack.

Will include pic when done and tested.

She might let me go fish next week. Even might go with me.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top