Homemade noroll sinker mold

Discussion in 'Sinker Making Institute' started by afatcat, Feb 2, 2009.

  1. afatcat

    afatcat New Member

    Messages:
    19
    State:
    north carolina
    Does anyone know how to make a homemade noroll sinker mold?
     
  2. BIG_D

    BIG_D New Member

    Messages:
    8,107
    State:
    Batchtown IL.
    thear is a patern for one in the boc library made out of sheet rock
     

  3. Turtleracer

    Turtleracer New Member

    Messages:
    59
    State:
    Upper So. Cal.
    I have been unable to locate the mentioned article. Can you add a link?

    Craig
     
  4. BIG_D

    BIG_D New Member

    Messages:
    8,107
    State:
    Batchtown IL.
    the no roll out of sheet rock is on page two in the library
     
  5. Catfishboy1995

    Catfishboy1995 New Member

    Messages:
    3,104
    State:
    Council Bluffs
    couldnt find it either dallas?
     
  6. BIG_D

    BIG_D New Member

    Messages:
    8,107
    State:
    Batchtown IL.
  7. Catfishboy1995

    Catfishboy1995 New Member

    Messages:
    3,104
    State:
    Council Bluffs
  8. flatheadslayer

    flatheadslayer New Member

    Messages:
    5,834
    State:
    Thomaston, Geor
    i use freeze plugs,different sizes for different weights.cheap and they work great.
     
  9. Catfishboy1995

    Catfishboy1995 New Member

    Messages:
    3,104
    State:
    Council Bluffs
    Really? I use freeze plugs on my spud guns!!lol
     
  10. flatheadslayer

    flatheadslayer New Member

    Messages:
    5,834
    State:
    Thomaston, Geor
    ?
     
  11. Catfishboy1995

    Catfishboy1995 New Member

    Messages:
    3,104
    State:
    Council Bluffs
    Take some pvc...take a 2 ft piece of 4in. and then get a reducer take it down to 2 in and the pput a potato in the end...take some starting fluid or hair spray then ad a freeze plug put it on TIGHt and have a grill ignitor in the combustion chamber and spark the grill ignitor and boom the potato goes FLYING!!!look it up on youtube!!:big_smile:
     
  12. flatheadslayer

    flatheadslayer New Member

    Messages:
    5,834
    State:
    Thomaston, Geor
    i don't know toys to good.
     
  13. :angry:
     
  14. Bomberman

    Bomberman New Member

    Messages:
    703
    State:
    Spring Run, PA
    For a quick No-Roll sinker mold, just use an old teaspoon or old soup spoon. Pour the lead in it and let it cool. Drill a hole in one end and you have a no-roll sinker. A teaspoon makes them between 1 and 2 oz, depending on how full you fill the spoon. A soup spoon between 1.5 and 3 oz. You can use a table spoon for larger sinkers. No need getting fancy...esp. if you fish in snag filled waters.

    You can run your line right through the sinker if you wish but I use a sinker slide (sometimes called a fishfinder rig) so I can remove mine when not fishing. It keeps the rods from getting banged up by the sinkers when running between spots in the boat. They work great.