homemade lead ladle

Discussion in 'General Conversation' started by whisker maniac, May 14, 2009.

  1. whisker maniac

    whisker maniac New Member

    Messages:
    2,712
    State:
    arkansas
    Made this ladle last nite. Used a piece of pipe and flat iron. Cut out the flat iron to fit one end of the pipe and welded it to it. Then I welded on a piece of all thread for the handle and put on an old grip from an old tool I don't use. Could also just make a wood handle and put on it. Also used a die grinder and cut in some pouring spouts on the inside of the pipe.
     

    Attached Files:

  2. Dirtdobber

    Dirtdobber Guest Staff Member

    Messages:
    3,584
    State:
    Vian Okla
    Looks good. Let us know how it works.
     

  3. Mickey

    Mickey New Member Supporting Member

    Messages:
    14,592
    State:
    Illinois
    Looks good Kevin
    should do the trick. You need to add that to the library. Could save someone a piece of changes.
     
  4. katfish ken

    katfish ken New Member

    Messages:
    4,092
    State:
    Paintsvill
    Good looking laddle Kevin . Reps to ya.