Crappie tube bait molds

Discussion in 'Crappie Fishing' started by bluehunter, Apr 3, 2006.

  1. bluehunter

    bluehunter New Member

    Messages:
    3,004
    State:
    Los Angele
    do anybody know of where you can get molds for pouring mini jig tubes? I plan on pouring plastics and would also like to make mini jigs as well. Thanks in advance!
     
  2. Dragger

    Dragger New Member

    Messages:
    538
    State:
    North Carolina
    Brian, I used to make my tube baits for crappie,& bass. I just got the plastic hot and used #16 finish nails , just dip the nail head into the plastic, about 1 1/2 inchs, push the sharp end into a block to dry, repeat the same way to add the color to the front end, about 3/4 inch , let the plastic cool, slide them off the nail and split the ends with 2 rozor blades. Also a very thin coat of worm oil on the nail will make them release better.:0a26: I also make a 4inch bass worm with 2 # 6 hooks molded in on a line . it was a local worm that was in the N.C. area for years, and it produced a lot of bass, I am in the process of setting up to remanufacture that worm. I have the molds they were made in.........Steve
     

  3. flannelman

    flannelman New Member

    Messages:
    111
    if ur lookin to buy a mold, i suggest Barlows Tackle. they have a lot of soft plastic molds and i think i saw one for tubes. good luck
     
  4. bluehunter

    bluehunter New Member

    Messages:
    3,004
    State:
    Los Angele
    Thanks for the info guys.
     
  5. jtrew

    jtrew New Member

    Messages:
    4,404
    State:
    Little Rock, AR
    Jann's Netcraft used to have stuff to make plastic worms, grubs, & curlytails, but I havn't messed with that in over 20 years, so I can't say whether or not they still carry any of that.
     
  6. carpfisherman11

    carpfisherman11 New Member

    Messages:
    48
    State:
    ohio
    333333333333333333333333333333333
     
  7. carpfisherman11

    carpfisherman11 New Member

    Messages:
    48
    State:
    ohio
    444444444444444444444444444444444444444
     
  8. carpfisherman11

    carpfisherman11 New Member

    Messages:
    48
    State:
    ohio
    5555555555555555555555555555555
     
  9. carpfisherman11

    carpfisherman11 New Member

    Messages:
    48
    State:
    ohio
    6666666666666666666666666666666
     
  10. carpfisherman11

    carpfisherman11 New Member

    Messages:
    48
    State:
    ohio
    7777777777777777777777
     
  11. carpfisherman11

    carpfisherman11 New Member

    Messages:
    48
    State:
    ohio
    8888888888888888888888888888888
     
  12. carpfisherman11

    carpfisherman11 New Member

    Messages:
    48
    State:
    ohio
    9999999999999999999
     
  13. carpfisherman11

    carpfisherman11 New Member

    Messages:
    48
    State:
    ohio
    101010101010101010101010101010
     
  14. carpfisherman11

    carpfisherman11 New Member

    Messages:
    48
    State:
    ohio
    sorry about that guys i needed 8 more replys before i could send a private message
     
  15. jtrew

    jtrew New Member

    Messages:
    4,404
    State:
    Little Rock, AR
    Figured it was something like that.