Catfish Angler Forum at USCA banner

crack in lower unit

1318 Views 2 Replies 3 Participants Last post by  Bobpaul
i have a crack in my lower unit ,looks like water got in there and froze and cracked the case above the cone(white line in pic). i tried grinding it out and using jb weld but it cracked again. any body know if it can be welded


See less See more
1 - 1 of 3 Posts
Take it to a good shop where they weld alum and they may or may not be able to weld it with the gears in it. I do know it can be welded.
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.