CMC Universal Outboard Motor Power Trim & Tilt

Discussion in 'Bubba's Outboards' started by ShilohRed, Jan 9, 2007.

  1. ShilohRed

    ShilohRed New Member

    Messages:
    4,339
    State:
    West Tn
    Anyone used one of these?
    Looking at putting one on my Yamaha 25 Hp 4-stroke.
    Or is there a better one out there?
    Pete
     
  2. Bubbakat

    Bubbakat New Member

    Messages:
    4,532
    State:
    McMinnvill
    Pete they don't get any better then those. I have one on my 85 evenrude and they are really well made and easy to install.
     

  3. ShilohRed

    ShilohRed New Member

    Messages:
    4,339
    State:
    West Tn
    Buddy Old pal if it walks off. I did not do it..:roll_eyes: It was not me that got it:crazy:
    Thanks Buddy Old pal.......:big_smile:
    Pete
     
  4. jdstraka

    jdstraka Well-Known Member Supporting Member

    Messages:
    4,721
    State:
    Council Bluffs, Iowa
    Name:
    John
    Dito I Love mine.J.D.
     
  5. Bobpaul

    Bobpaul New Member

    Messages:
    3,039
    State:
    Supply NC
    Bubba, put a lock on that thing:roll_eyes:
     
  6. ShilohRed

    ShilohRed New Member

    Messages:
    4,339
    State:
    West Tn
    Thanks for the help. Now I will have to drag the blue wrench out to get it.:big_smile:
    Pete
     
  7. Bobpaul

    Bobpaul New Member

    Messages:
    3,039
    State:
    Supply NC
    Just trying to keep you alive Pete. I heard that Bubba guy owns a gun:eek:oooh: .
     
  8. ShilohRed

    ShilohRed New Member

    Messages:
    4,339
    State:
    West Tn

    Yes he does. but I am so small, that he can't see me to hit me.:big_smile: + he is a blind bat.. :smile2:
    may have to look around and find on around here. That way Willard can't shoot me.
    Also Willard I will think of you . Putting on a 16 lb shoulder in a few for tomorrow.
    Pete
     
  9. coach

    coach New Member

    Messages:
    1,564
    State:
    Greenville , Ms
    i've got one a 50 horse johnson............. love it .............. did have to beef up the transom with aluminum plate and ran extra gussets .......
     
  10. Bubbakat

    Bubbakat New Member

    Messages:
    4,532
    State:
    McMinnvill
    Pete you had better get it out of your mind about my lift.

    Coach you are right on the transom build up on some boats . those lifts are well built. That thing is really over built but I like the contaiment of it all together. They aren't really over priced either.
     
  11. ShilohRed

    ShilohRed New Member

    Messages:
    4,339
    State:
    West Tn
    Willard my 85 like that has factory tilt and trim. And I think yours will work just great without the CMC on it. HEHE
    I am sure trying to get one. Would save my back tilting the motor up and even help out being able to trim the motor out.
    Thanks guys.
    Now to find on that I can handle $$ is tight now may not even be able to fish more them 4 days per week.:sad2:
    Pete
     
  12. fish

    fish Active Member

    Messages:
    1,573
    State:
    ChattanoogaTenn
    Did you say Willard has A gun? That is like saying the Army has only one tank, that boy has an arsenal.LOL
     
  13. ShilohRed

    ShilohRed New Member

    Messages:
    4,339
    State:
    West Tn

    But Jim they will only allow him on bullet and it has green stuff growing on it :tounge_out:
    Boy why do I pick on by buddy for.. Willard forgive me and don't hold it against me :big_smile:
    Pete
     
  14. Bubbakat

    Bubbakat New Member

    Messages:
    4,532
    State:
    McMinnvill
    I won't hold it against you. I will be at least two arm lengths away from when I let go.

    Pete they make those for a unit up to a 35 and another size up to a 150 and the lower unit ain't that bad of a cost. If you decide to oder one let me know I know the chepest site you can order one from and it will be cheaper then the company site it list on. I gave about 425 for mine for that 85 and came with every thing and the selnoids are sealed against water.
     
  15. Bobpaul

    Bobpaul New Member

    Messages:
    3,039
    State:
    Supply NC
    "One Bullet" Now that's funny:lol:
     
  16. Bubbakat

    Bubbakat New Member

    Messages:
    4,532
    State:
    McMinnvill
    I don't need but one . You all ever hear the saying one bullet one kill.:lol:
     
  17. ShilohRed

    ShilohRed New Member

    Messages:
    4,339
    State:
    West Tn

    Buddy the only thing you would hit with the one bullet is your foot HEHE
    I would let you shoot at me from there to here:big_smile:
    Pete
     
  18. ShilohRed

    ShilohRed New Member

    Messages:
    4,339
    State:
    West Tn
    I have a Pt 130 on the way. So Guess I will be mounting it on my boat next week.
    Will have to drill the holes for it in the back of the boat. As its never been drilled for a motor.
    Pete
     
  19. Bubbakat

    Bubbakat New Member

    Messages:
    4,532
    State:
    McMinnvill
    You won't regret putting that on pete.
     
  20. ShilohRed

    ShilohRed New Member

    Messages:
    4,339
    State:
    West Tn

    I look forward to it being on there. And will be nice to trim the motor up. And even get lazy :big_smile:
    Pete