Chads Bait Cooler

Discussion in 'Catfishing Library' started by BigCatter54, Feb 7, 2008.

  1. BigCatter54

    BigCatter54 New Member

    Messages:
    811
    State:
    Oklahoma City
    I built my current bait holder out of a cooler, the one that you can open just part of the lid, I bought one of the tank aerators from walmart, the one that had the suction cups on the bottom. Drilled two holes for the wires to go through on the bottom lid (the one that when you open it opens the whole thing), pulled the wires through the holes, then attached the battery clips to the wires (note: if you attach the battery clips to the wires before hand you wont be able to pull the wires through the holes, and then you wont be able to fully close your lid as you will have wires sticking out) also you do have to keep a 12V battery with this setup, but i think I am gonna attach an extension cord to it so when i have it at home i can just plug it in. Here are some pics.

    [​IMG]

    [​IMG]