Catfish Angler Forum at USCA banner
1 - 6 of 6 Posts

· Registered
Joined
·
174 Posts
Discussion Starter · #1 ·
anyone had any expierience with this stuff? Im wondering how its going to hold up after a year or two of wear and tear. Ive used products in the past like hurculiner and vortex spray in liner without much luck.. they always peel and wear off within a years time.
 

· Registered
Joined
·
2,121 Posts
i have had it my boat for a little over a year and my boat bets used hard.. i have not had any issues!! the key to the process is the prep and you must use the correct primer!! tits a great product if you follow the directions. also be sure to buy the rollers they sell to do the job or you will regret it!
 

· Registered
Joined
·
1,192 Posts
i have had it my boat for a little over a year and my boat bets used hard.. i have not had any issues!! the key to the process is the prep and you must use the correct primer!! tits a great product if you follow the directions. also be sure to buy the rollers they sell to do the job or you will regret it!
Ahem??? Boat liner is the topic, but we can see what's on your mind. LOL!!
 

· Registered
Joined
·
174 Posts
Discussion Starter · #4 ·
i have had it my boat for a little over a year and my boat bets used hard.. i have not had any issues!! the key to the process is the prep and you must use the correct primer!! tits a great product if you follow the directions. also be sure to buy the rollers they sell to do the job or you will regret it!
Very true.. any good paint job is made in the prep work but assuming that was all done to spec i wanted to see how the product would hold up. Sounds like you have had a good expierience with it, whats so different about the rollers that they sell?

Do you have any pictures of it in your boat?
 

· Registered
Joined
·
785 Posts
This spring I used it on my boat. If you want to take a look at it go down in the boat mod journal. Its under "my new 1983 18 foot sylvan". Like what was previously mentioned its all about the prep. I took a bunch of photos of the entire process. Also buy more than it calls for. I bought 2 gallons and applied three coats. I ended up having a little less than a half gallon left. Also if you are going to do it let me know. I will sell you the rollers cheaper than you can buy them anywhere. For some reason I decided to buy way too many when I did it.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top