Boat repair help

Discussion in 'LOCAL SOUTH CAROLINA TALK' started by Cutbait101, May 17, 2009.

  1. Cutbait101

    Cutbait101 New Member

    Messages:
    281
    State:
    south carolina
    It is called rub rail.you can get it from most marine dealers.easy to install.i would suggest having two drills to install it. one with a drill bit and one with a screw driver bit and you will need a second person to help hold the rail so it will not get bent.and the best way to put the black rubber center piece in is with a rubber hammer.good luck
     
  2. Cutbait101

    Cutbait101 New Member

    Messages:
    281
    State:
    south carolina
    not sure there are many different designs cut a piece and take with you to match it up.rough estimate under 150