2 barrel carburater for a 84 ford f150

Discussion in '4X4 Truck Talk and Repairs' started by catfisherman369, Oct 14, 2008.

  1. catfisherman369

    catfisherman369 Floyd

    Messages:
    4,944
    State:
    Nashville Il.
    Im in need of a 2 barrel carburater for a 84 ford f150 with a 302 v8
    The price of a new one is crazy .
    Hope someone can help me out . Please email with the price you want for it .
    to grizzly361@frontiernet.net
     
  2. catoon

    catoon Board Clown!

    Messages:
    1,387
    State:
    whiteville
    i dont have 1
     

  3. willcat

    willcat New Member

    Messages:
    2,463
    State:
    texas
    all i can say is good luck they are pretty hard to come by, you might be better off going aftermarket or getting an intake / carb combo & hop it up a bit!!!
     
  4. 54ball

    54ball New Member

    Messages:
    7
    State:
    Alabama
    You can try to rebuild it. I've rebuilt a couple and had so-so results. Both of my rebuilds ran for a while then quit.
    I installed a new Holley 2300 350 cfm on my 63 F-250 with a 292 and it runs like new. I did not realize how bad it ran until I put on that new Holley. It should be a direct bolt on, on that 84 Ford . New from Summit it will run you $269 plus shipping. I found my local for just a little more.
    http://www.holley.com/applications/CarburetorSelector/0-7448
    http://www.holley.com/applications/CarburetorSelector/0-4412C
    http://store.summitracing.com/partd...part=HLY-0-7448&N=700+400178+115&autoview=sku