Lowrance X-97
General
Display: .............................5.0" (12.7 cm) diagonal high contrast Film
SuperTwist; programmable to viewing preference.
Resolution:...................... 320 pixel x 320 pixel resolution; 102,400 total
pixels. 10-level grayscale definition.
Backlighting:.................. Fluorescent cold cathode screen with multiple
lighting levels; backlit keypad.
Input power:................... 10 to 15 volts DC.
Case size:......................... 5.4" H x 6.9" W x 3.4" D (13.8 x 17.6 x 8.6
cm); sealed and waterproof; suitable for
saltwater use.
Back-up memory: .......... Built-in memory stores sonar records for
decades.
Languages:...................... 10; menu languages selectable by user.
Sonar
Frequency:...................... 200 kHz for the X97.
Transducers: .................. a single-frequency with built-in temperature
sensor is packed with the X97. It has a 20° cone angle. Transducers operate
at speeds up to 70 mph (61 kts).
Transmitter: ................... X97:
3,000 watts peak-to-peak/375 watts RMS.
This is one of three sonar units I have on my boat. I do not use the auto sensitivity mode or the auto depth range. I do on occasion use the Fish Reveal mode. I usually have my sensitivity setting around 68 to 72. I have my Grayline set at 70. These settings are not fixed in stone and I change them frequently. They are a starting point. This unit is my primary "fish locator" despite the fact that I have a unit(LCX-15-MT) with higher resolution on my boat. This one will get the job done.
|
