Results 31 to 40 of 446
Thread: 2012 Susky Reports
01-07-2012, 07:07 PM #31
Wheelchair on boat
REMOVE THESE ADS
BECOME A LEVEL 2
01-07-2012, 07:22 PM #32
haha lee will just lift ya in lol........i wouldnt try brunner island.....alot of channels there not many flats.....try at falmouth....ive seen guys catch flats right from sure....down a little bit from the boat ramp.
01-07-2012, 07:26 PM #33
one other tip is wait till the river gets low this summer and go out and cruise around, slow of course, motor trimmed up and that way you can get a good idea of where all the big rocks are and the main channel is. Take a person with ya to spot rocks. Thats basically how i started out.
01-07-2012, 08:02 PM #34
01-07-2012, 09:27 PM #35
yep id say thats your best bet....ive also seen some nice channels caught off the bank at long level but thats kinda a hike down 83.
01-08-2012, 07:22 AM #36
You are going to be all over the Flatheads this year Joe! I'd do exactly like Lee says and get yourself a nice fishfinder with a GPS. You'll be golden once you get your routes locked in during the low water period. Follow the lines on the unit and you should be good to go.
01-08-2012, 06:06 PM #37RebelManmonster catfish
Fished 6 hours today. Caught 2 channels one was 5lbs the other one was 8lb7oz. I had a good bite on my one rod and set the hook and my braid snapped! I wont be using braid EVER again. Im putting 40 mono on it tonight and throwing that braid away for good. It was nice to use 3 rods when fishing byself LEGALLY lol. Hopefully get out tomorrow and do it again.
I had to get one picture in like rivershark
Pretty cool sunset and the water temp was 35
01-08-2012, 07:04 PM #38
if you want to go. we can get you in the boat. i would have the boat in the water. and we can use an atv ramp and get you right in. i would go in may for flatheads. late march for channels and april. i m doing a new thing this year for channel cats. 10lb channel cat or your trip is free.
01-08-2012, 07:06 PM #39
if a fish finder with gps is out of price range use a hand held garmin and mount it on the console. that will work also for making routes, and marking holes.
01-08-2012, 10:19 PM #40