Results 1 to 10 of 11
02-07-2011, 08:28 PM #1
lowrance hds 10 SI interpretation
I have one of these units, I have had it about 2 months, and still learning it. Could someone tell me exactly how to read the SI part. Hope this makes sense!
REMOVE THESE ADS
BECOME A LEVEL 2
02-08-2011, 09:27 PM #2
02-08-2011, 09:34 PM #3
this should help
02-08-2011, 09:45 PM #4
Brad, can you be a little more specific? What are you wanting to know? Your boat is in the middle and you are looking to the left and right of your boat.MONSTER ROD HOLDERS PRO STAFF
02-09-2011, 09:04 PM #5
I recieved a pm from a guy who gave me a great link which was a bass fishing web site, which had some great info on humminbird, which scans the same way , very good info., thanks
02-10-2011, 05:52 PM #6
The 0 is the center of the boat, the black area out from each side of that is what your down scan is seeing and everything out each side from that is the structure or fish in that area. I have an HDS 8. Look at my profile I have some pics up there with explanations of what you are seeing.
Hope that helps
02-10-2011, 07:16 PM #7No good deed goes unpunished
I use and recommend Monster Rod Holders & Wild Wolf Tackle
02-10-2011, 07:57 PM #8
05-10-2011, 12:45 PM #9
05-10-2011, 01:01 PM #10
I do not have one yet. I made the mistake of trusting a rep at cabelas and got a new unit right as they were coming out with the Side scan. He told me that the Side scan would work on the older Lowerance units. He had talked to his rep and was told that with so many running the units they they made it retro fit to via the data link (Ithink that is the name) plug. Sounded great since the unit was a stand alone unit. I plan on upgrading mid year or at the end of the season. I have done a lot of looking talking and on the water testing of the units though.