Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Cast net modification.

  1. #1
    Phil
    BigRoo's Avatar
    Member Since
    Jul 2009
    Location
    Poca,West Virginia
    Posts
    44
    Post Thanks / Like

    Default Cast net modification.

    Has anyone ever tried to add weight to your net for a faster sink rate to use in deeper and faster water? Here in West Virginia we are limited to a 3 foot radius net and all the nets that I found in that radius only have three quarters of pound of weight per foot of net, the better and larger nets have one and a half pounds per foot. I bought a Betts Tyzac net (3 foot radius) these nets are meant for shallow slow water applications so I thought I could add some weight. Any ideas would very helpful. Thanks,Phil :confused2:

  2. #2
    Rick
    RPnKC's Avatar
    Member Since
    Aug 2005
    Location
    Kansas
    Posts
    403
    Post Thanks / Like

    Default

    I've been toying with the idea of adding some large split shot all the way around one of my net. I think I got it from Walmart, and have realized the difference in performance compared to other higher quality nets I have owned.

  3. #3
    Josh
    Iowa_Josh's Avatar
    Member Since
    Aug 2005
    Location
    Central Iowa
    Posts
    1,393
    Post Thanks / Like

    Default

    I think I added some to one by drilling out some egg sinkers, then cutting them open, prying a litte farther and then crimping them over the outside string between the other weights.

    We have the same sort size law here.

  4. #4
    Phil
    BigRoo's Avatar
    Member Since
    Jul 2009
    Location
    Poca,West Virginia
    Posts
    44
    Post Thanks / Like

    Default

    Hey Josh
    Did adding the weight help the performance of your net.? Phil

  5. #5
    Terry
    tbird's Avatar
    Member Since
    May 2009
    Location
    IN
    Posts
    243
    Post Thanks / Like

    Default

    get some big rubber core sinkers take rubber out and pinch them on.

  6. #6
    Glenn
    Catmanblues's Avatar
    Member Since
    Jul 2007
    Location
    S.E Ohio
    Posts
    2,127
    Post Thanks / Like

    Default

    Never really had much problems with the 3 footer I bought from walmart in my area.

  7. #7
    chip blevins
    riverdawg-1's Avatar
    Member Since
    Jan 2007
    Location
    salem, va
    Posts
    720
    Post Thanks / Like

    Default

    i've added weight to 6 ft nets using old weights off of an old torn up one. just tie them inbetween the existing ones with heavy mono

  8. #8
    Mike
    ste6168's Avatar
    Member Since
    May 2008
    Location
    Pittsburgh, PA
    Posts
    620
    Post Thanks / Like

    Default

    I've always wondered this also. I have a Bass Pro net with 1lb per ft. I would like to add some weight to mine, but do not want to hinder the performance of it opening!

    I would love to hear some "expert" opinions on adding weight

  9. #9
    matthew wright
    Swampfox.'s Avatar
    Member Since
    Nov 2008
    Location
    Louisiana
    Posts
    985
    Post Thanks / Like
    Blog Entries
    8

    Default

    when adding weight, spread out on floor evenly, and distribute weight evenly. think of it as a clock face. start at 12 then 3 then 6 then 9oclock. you want to keep the balance. i would try 2oz bank sinkers, wired to those points. if more is needed, leave what you got, step down to 1oz banks and fill in evenly again. careful not to add to much to fast, can be too heavy at one point. takes some tuning.

  10. #10
    Jay Smith
    Grimpuppy's Avatar
    Member Since
    Jul 2007
    Location
    Clifton, Kansas
    Posts
    2,899
    Post Thanks / Like

    Default

    I have an old 3 foot net that I added weight to once. I destroyed 3 nets and it was my last resort net. I took them from one of the other nets that was completely trashed. I was still able to throw it and get it to open but it aint near as easy. It will also wear you out quick if you are throwing a lot, searching for shad. Still never got good results in deep water, even with 2 lb of weight per foot and 40 foot of rope. Even tried the duct tape trick. I never caught any more shad with it after I modified it than I did before and never caught deep water shad with it. I also did not catch near the shad in it that I do with a bigger net. I have found that no matter what I do to a small net to make it better, a bigger net always works better. Thankfully we can use as big of a net as we want in KS, so I got another 7' net. The 3 foot net basically sits in the boat as an emergency net now.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •