onlyriverfish
05-21-2007, 09:37 AM
What am I missing in the "dead zones" with my sonar?
definitly something to say for those that do fish structure regardless if arch is seen or not.
http://www.vexilar.com/help/tips/tip006.html
http://www.gme.net.au/marine/PDFs/fi...fact_sheet.pdf (http://www.gme.net.au/marine/PDFs/fishfinder_fact_sheet.pdf)
One reason I run two sonars at opposite sides is an attempt to have one catch what the other would miss esp. at a sloping bank situation.
A narrow cone angle lessons the chances of this, but have never seen HB/lowrance/other brand comparisons with the new multibeam xducers.
Wondering what others might have learned about this as it is not talked about much:smile2:
definitly something to say for those that do fish structure regardless if arch is seen or not.
http://www.vexilar.com/help/tips/tip006.html
http://www.gme.net.au/marine/PDFs/fi...fact_sheet.pdf (http://www.gme.net.au/marine/PDFs/fishfinder_fact_sheet.pdf)
One reason I run two sonars at opposite sides is an attempt to have one catch what the other would miss esp. at a sloping bank situation.
A narrow cone angle lessons the chances of this, but have never seen HB/lowrance/other brand comparisons with the new multibeam xducers.
Wondering what others might have learned about this as it is not talked about much:smile2: